Gold Member Since 2017
Audited Supplier

Shandong Eastern Rolling Stock Roadrailer Company Limited

Locomotive manufacturer / supplier in China, offering Railroad Tractor with ISO9001, Rail Locomotive with Cummins Engine, Rail Puller with Cummins Engine and so on.

(/ )

Supplier Homepage Company Show Bulletin Board Operation Instructions for Roadrailer

Bulletin Board

Operation Instructions for Roadrailer [Apr 21,2017]
Operation Instructions for Roadrailer
(1)Check the work plan before operation, confirm no obstacles on the route, the turnout.

(2)When we see the wheel round is along in a straight line with the track from the surveillance video, land the steel wheels with the joystick, keep them completely contact with the tracks, close the middle locking device using the intermediate locking lever.Whistle and brake test for starting operation.

(3)Lift the coupler handle, hit the truck to connect the couplers and link the air couplers with hand. Turn the brake control lever to release position. When the red pointer point at among 0.5 to 0.6 mpa in double pointer pressure gauge, turn the brake control lever to pressure holding position and start traction operation.

(4)The total weight of the traction is not allowed to exceed the rated tonnage. Speed control within 5km/h.Before entering the curve or turnout, the speed should be reduced to 2km/h and commander's guidance is obeyed.

(5)Strictly obey the instructions of the commander, and no speeding is allowed.

(6)Foot brake valve brake shall be used when unloaded driving. The roadrailer special brake system shall be used and the hydraulic system is strictly prohibited during loaded operation.

(7)Do not parking on the curve on turnout in case it falls off the rail. Whistle twice when restart.

(8)Kept in a proper place when off work. A bar is needed in front and rear of the wheels to prevent sliding.